Just in: Very nice review by Scott Wagner over at Concealed carry. Check it out
Tac-D Pivot Review
The Tac-D Pivot is the compact, side loading version of the tried and true Tac-D 37mm launcher. It utilizes the popular and reliable Tac-D receiver in conjunction with a new side loading upper with a 6 inch barrel.
With the push of a button, the barrel snaps back to clear the strike plate so that you can pivot it 37 degrees for easy loading. Pull it back and it locks with an authoritative "snap". Easy and positive.
The pivot itself is anchored with a 1/4" screw and two 1/8" steel dowels so that alignment is maintained.
The Tac-D Pivot has an ambidextrous safety and fully enclosed cartridge head design. The receiver is one piece for enhanced durability and reliability. Check out the pictures and order now!
The Tac-D Pivot can be expanded to a stand-alone configuration easily. We offer the kit to do so for a modest up charge (see drop down). A comparison between the underbarrel and stand-alone configurations is below.
We found a great Go Bag to house the launcher and expansion pack. See the Drop Down for a package price. To see the bag on its own go here
Entirely made in Florida, USA!
The Tac-D Pivot uses the Tac-D receiver, proven thru the use of a thousand consumers. It is single action with a cocking lever on the side. It boasts a positive trigger block safety. As with all our Launcher products, it is chambered in 37/38 mm and made to the highest standards of American workmanship. Constructed of 6061 aircraft grade aluminum and 4140 hardened steel, it is rugged while maintaining a reasonable weight.
The Tac-D Pivot mounts on any rifle or carbine fitted with a Picatinny Rail using the included 4” clamp and two bolts that provide the most solid attachment in the industry. As always, state of the art materials are used throughout, the forward grip is machined as part of the barrel itself. All parts are Hard Coated or Black Oxide treated. We think that you will agree that it is a perfect counterpoint to your AR platform weapon. Note that care should be used if you use the KeyMod or M-Lok mounting system with the Tac-D Pivot (or any Underbarrel Launcher from any manufacturer). Neither of these systems are meant to handle heavy recoil.
- Ambidextrous safety
- Fully enclosed cartridge head
- One piece receiver for strength and reliability
- Improved barrel lock up. Positive, enclosed push button. No dangerous and silly "paddle".
- Larger, more ergonomic cocking lever.
- Larger trigger guard to accommodate gloved hands.
- Unobstructed top so the launcher will lie flat against a full length Picatinny rail
- Beveled lower Picatinny rail.
- Integral, machined hand guard. Looks great and increases strength.
- Stock expansion system looks great and won't break the bank.
- Reduced weight: 2lbs 5 oz.
- Can be easily and inexpensively converted to a shoulder mounted configuration.
Pivoting Barrel Loading
Single Action/Side mounted cocking handle
Sights – None
Stock – None Mounts to any weapon with a Picatinny Rail using the included Picatinny to Picatinny clamp
Barrel Length – 6”
Weight (with clamp) – 2lb 5oz
Rails – 6” top, 2” bottom
Safety – Positive trigger block
Aluminum parts treated to MIL-A-8625, Type II, Class 2
The Tac-D Pivot handles standard 37mm ammunition. In certain cases, cartridges longer than the barrel are acceptable. Available ammunition includes flares, smoke and other pyrotechnic rounds for civilian use. If you are a member of law enforcement or the military you can have a variety of “Less Than Lethal” rounds at your disposal. These include Batons, CS Gas, Wildlife Management (Bird Control) and crowd dispersing Rubber Pellets.
Description and Features
The Tac-D Pivot is equipped with a 6” barrel with a 6" upper Picatinny Rail for attachment to your Picatinny Rail equipped weapon. The underside of the barrel has a 2” rail at the muzzle end for bipod or other accessories. Loading is accomplished by releasing the barrel. The spring action will move it forward, out of battery, so that it can be pivoted for loading. All common 37mm Ammunition can be easily accommodated; this includes Batons and other Less-Lethal Law Enforcement rounds as well as the OG 26.6mm and 12 ga. adapters. Note that with after-market quad rails, the Tac-D can attach to the AK, SKS and any tubular feed shotgun. Click on the images for a larger view. The standard finish is tactical black. Note that pictures may show accessories not included in price. Price includes only launcher and Picatinny to Picatinny clamp or the Standalone accessories. The Standalone configuration includes a Tac-D stock adapter, 6 Position AR stock, Vertical Foregrip, Castle Nut wrench and hex wrench for mounting.
We think that you will agree that it is a perfect counterpoint to your AR platform weapon.
NO FEDERAL LICENSING REQUIRED!!
If you have questions, please call us at 941.592.7227